
Specifications, Requirements, and Precautions AW00118501000
2 Basler racer Camera Link
1.2 General Specifications
Specification raL2048-80km raL4096-80km
Sensor Size 2048 pixels 4096 pixels
Sensor Type Awaiba DR-2k-7
Monochrome Linear CMOS
Awaiba DR-4k-7
Monochrome Linear CMOS
Pixel Size 7 µm x 7 µm
Max Line Rate 80 kHz
Min Line Rate No minimum when an external line trigger signal is used
100 Hz when an external line trigger signal is not used
Mono/Color Mono
Sensor Bit Depth 12 bit
Data Output Type Camera Link base, medium or full configuration
Connectors One 6-pin Hirose micro-minature receptacle
Two Camera Link 26-pin SDR connectors
(also known as Mini Camera Link connectors)
Camera Link Clock Speed 32.5 MHz, 48 MHz, 65 MHz, 83.5 MHz (selectable)
Camera Link Tap
Geometry
1X2, 1X4, 1X8, 1X10
Pixel Bit
Depths
8 bit, 10 bit, 12 bit
Synchronization Via external trigger signal, via software trigger signal or free run
Exposure Control Programmable via the camera API
Power Requirements PoCL (Power over Camera Link compliant)
or
+12 VDC (± 10 %), < 1 % ripple, supplied via the camera’s 6-pin connector.
Max Power Consumption
(at 12 VDC)
< 4W < 4.5W
Lens Adapter Universal camera front, suitable for C-mount (available as accessory)
Size
(L x W x H)
33.77 mm x 56 mm x 62 mm (without lens adapter or connectors)
48.57 mm x 56 mm x 62 mm (with C-mount lens adapter and connectors)
Weight ~ 200 g (typical) without lens adapter
~ 230 g (typical) with C-mount lens adapter
Conformity CE, FCC, KCC, UL (in preparation), GenICam, GigE Vision, IP30
Table 1: General Specifications - 2k and 4k Mono Cameras
Commenti su questo manuale